APPENDIX C Pin Status for Each CPU Status
Table C.1 explains the terms used in the pin status list. Table C-2 to Table C-5 list the
pin status for each CPU status.
Note that the pin status at reset differs between the external bus mode and single chip
mode.
Explanation of Terms Used in the Pin Status List
The terms used in the pin status list are explained below.
Table C-1 Explanation of Terms Used in the Pin Status List
Input possible
Input fixed to 0
Output Hi-Z
Output retained
The previous
status is retained
Term
Input functions are ready to use.
External inputs are blocked out and the value "0" is transmitted
internally from the input gate near the pin.
Pin drive transistors are put in drive-inhibited status, and their pins
are put in high-impedance status.
The output status immediately before this mode is entered is output
unchanged. For example, if an internal peripheral component with
an output is operating, this output is not inhibited. In case of an
output to a port, this output is retained.
The output status immediately before this mode is entered is output
unchanged. Inputs are not inhibited either, and are processed
accordingly.
APPENDIX C Pin Status for Each CPU Status
Explanation
383