Table of Contents
Advertisement
CHAPTER 14 PWM TIMER
Starting Multiple PWM Timer Channels Using the 16-Bit Reload Timer
In step 3) of the foregoing setting procedure, select the 16-bit reload timer as the start trigger in
GCN1 and then start the 16-bit reload timer instead of GCN2 in step 5).
The PWM timer can be restarted at regular intervals by setting toggle output for the 16-bit reload
timer by setting the following in the control status register:
RTRG:1 --> Enable restart.
EGS1, 0:11 --> Start at both edges.
322
Advertisement
Table of Contents
