Port-Channel Load-Balance - D-Link DGS-6600-48TS Manual

DGS-6604 m

port-channel load-balance

port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac}
no port-channel load-balance
Syntax Description
dst-ip
dst-mac
src-dst-ip
src-dst-mac
src-ip
src-mac
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)#
Switch(config)# end
CLI Reference Guide
Use port-channel load-balance to configure the load balance algorithm that the
switch uses to distribute packets across ports in the same channel. To reset the
load distribution to the default settings, use the no from of this command.
Indicates that the switch should examine the IP destination address.
Indicates that the switch should examine the MAC destination address.
Indicates that the switch should examine the IP source address and destination
address.
Indicates that the switch should examine the MAC source and destination
address.
Indicates that the switch should examine the IP source address.
Indicates that the switch should examine the MAC source address.
src-dst-mac
Global configuration
Use this command to specify the load balance algorithm. Only one algorithm can
be specified.
This example shows how to configure load balance algorithm for src-ip:
port-channel load-balance src-ip
Verify the settings by entering the show channel-group load-balance EXEC
command.
port-channel load-balance
499