Vrrp Show Vrrp - D-Link DGS-6600-48TS Manual

DGS-6604 m
show vrrp
show vrrp [interface INTERFACE-ID [VRID]]
Syntax Description
INTERFACE-ID
VRID
Default
Command Mode
Usage Guideline
Examples
CLI Reference Guide
This command is used to view the VRRP status.
(Optional) The interface name of a configured IP interface. When the
INTERFACE-ID is specified, the VRRP information that is related to the interface
will be displayed.
(Optional) A configured virtual router identifier.When both INTERFACE-ID and
VRID are specified, the VRRP information that is related to it will be displayed.
The virtual router identifier is configured with the vrrp ip command.
Range is 1 to 255.
None
User EXEC or any configuration mode
Use this command to view the VRRP information.
On the following page is an example from show vrrp. There are 2 VRID, 7 and 8,
configured in the interface vlan1, a VRID 5 configured in interface vlan2 and a
VRID 1 configured in interface vlan3.
show vrrp
785