D-Link DGS-6600-48TS Manual page 892

DGS-6604 m
Switch# configure terminal
Switch(config)# interface eth3.1
Switch(config-if)# storm-control broadcast level 90
Switch(config-if)# show storm-control interface broadcast
Interface Storm
-------------------------------------------------------------
eth3.1 Broadcast
Switch# configure terminal
Switch(config)# interface eth3.1
Switch(config-if)# no storm-control broadcast level
Switch(config-if)# show storm-control interface broadcast
Interface Storm
-------------------------------------------------------------
eth3.1 Broadcast
CLI Reference Guide
This example shows how to configure the Broadcast storm control LEVEL by
percentage mode. It assigns the percentage threshold level of interface eth3.1
for incoming broadcast packets to 90 and drops the packets that exceed the
threshold.
Action
Drop
This example shows how to return to the default setting for Broadcast storm
control level on interface eth3.1.
Action
Drop
Verify the settings by entering the show storm-control interface command
Type
percentage
Type
pps
storm-control level (Interface)
Threshold
90
Threshold
131072
882