Show Dos_Prevention - D-Link DGS-6600-48TS Manual

DGS-6604 m

show dos_prevention

show dos_prevention
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# Switch# show dos_prevention
DoS Prevention Information
Action: Drop Log
Frame Counts: 12345678
DoS Type
----------------------------------------------------
Land Attack
Blat Attack
Smurf Attack
TCP Null
TCP Xmas
TCP SYNFIN
TCP SYN SrcPort Less Than 1024
Switch#
CLI Reference Guide
Use this command to show DoS prevention status and related drop counters.
None
None
User EXEC or any configuration mode
Displays information about DoS prevention.
The following example shows the information of a DoS configuration example.
User has configured to enable DoS on attacking type "Land Attack", "Blat Attack"
and the action "Drop", "Log" are enabled. (Please note that enable dos
prevention to block blat_attack may block the Syslog packets.)
The "Action" row shows users have enabled "Drop", "Log" actions. The original
received attacking packets of "Land Attack", "Blat Attack" will be dropped. Each
packet dropped by DoS module will cause "Frame Count" increasing by 1. For
every five minutes, DoS module will add one log to system log if any attacking
packet is received in this interval.
State
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
show dos_prevention
594