D-Link DGS-6600-48TS Manual page 166

DGS-6604 mm
delete
delete FILE-SYSTEM:\ [PATH-NAME\] FILE-NAME
Syntax Description
FILE-SYSTEM
PATH-NAME
FILE-NAME
Default
Command Mode
Usage Guideline
Example
Switch#delete cf1:\test.txt
Delete cf1:\test.txt, (y/n) [n]?
CLI Reference Guide
Use this command to delete a file.
Specifies the file system.The valid values are flash or cf1. flash represents the
Compact FLASH storage of the control management unit. cf1 represents the first
open slot of compact FLASH storage.
(Optional) Specifies the name of the directory.
The file to be deleted.
None
Privileged EXEC
A firmware image or a configuration file that is specified as the boot-up file
cannot be deleted.
This example shows how to delete the file named test from the Flash card
inserted in cf1.
If the file to be deleted is used as boot up image or configuration file, then it
cannot be deleted and an error message will be displayed.
delete
156