Router Ospf - D-Link DGS-6600-48TS Manual

DGS-6604 m

router ospf

router ospf
no router ospf
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# router ospf
Switch(config-router)#
CLI Reference Guide
To configure an Open Shortest Path First (OSPF) routing process, use the router
ospf command in global configuration mode. To terminate an OSPF routing
process, use the no form of this command.
None
Not configured
Global configuration
This command is used to enable OSPF routing processes and enter into router
configuration mode then other OSPF-related settings can be configured.
This example shows how to enable ospf and enter the ospf router configuration
mode.
Verify the settings by entering the show ip protocols ospf command.
router ospf
537