D-Link DGS-6600-48TS Manual page 787

DGS-6604 m
Examples
CLI Reference Guide
The following are the causes for an interface to become an un-tagged member
port of a VLAN.
1. Configuration using an access VLAN command.
2. VLAN assignment from a RADIUS server.
Use the command show vlan [ subnet-base | mac-base ] to display a Subnet-
based VLAN or MAC-based VLAN respectively.
If no optional key word is specified all of VLAN configurations are displayed.
This example shows how to display all current VLAN entries.
show vlan
777