Enable - D-Link DGS-6600-48TS Manual

DGS-6604 m

enable

AE
enable [privilege LEVEL]
Syntax Description
privilege LEVEL
Default
Command Mode
Usage Guideline
Example
Switch> enable
Input privileged level 15 password:
Switch#
CLI Reference Guide
Use this command to enter a Privileged EXEC mode.
(Optional) Sets the privilege level for the user. The privilege levels are 12 and 15.
LEVEL: 15
User EXEC
Use the enable command to enter the Privileged EXEC mode and use the
disable command on page 159 to return to the User EXEC mode from the
power user level.
The command only accepts level 12 and 15.
An error message will appear if other levels are specified.
If the enable password is configured for a level, the user will be requested to
enter the password for the specified privileged level.
This example shows how to enter the Privileged EXEC mode:
enable
186