Show Ip Pim Bsr - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ip pim bsr

show ip pim bsr
Syntax
Default
Command Mode
Usage Guideline
Examples
Switch# show ip pim bsr
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 90.1.1.3
Uptime:
Next bootstrap message in 0DT0H0M21S
Candidate RP: 90.1.1.3(vlan100) Group acl:5
Next Cand_RP_advertisement in 0DT0H0M13S
Switch# show ip pim bsr
PIMv2 Bootstrap information
BSR address: 90.1.1.3
Uptime: 0DT0H0M38S, BSR Priority: 3, Hash mask length: 30
Expires: 0DT0H1M32S
Switch#
CLI Reference Guide
Use this command to show the bootstrap router (BSR) information.
None
None
User EXEC or any configuration mode
Use this command to display the elected BSR information and information about
the locally configured for the candidate rendezvous point (RP) advertisement.
The following example displays the BSR information on a BSR router with the
Candidate RP information on the router's interface, vlan100.
0DT0H18M50S, BSR Priority: 3, Hash mask length: 30
The following example displays the BSR information on a non-BSR router with
Candidate RP information on the router's interface
show ip pim bsr
680