Show Ip Community-List - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ip community-list

show ip community-list [COMMUNITY-LIST-NAME]
Syntax Description
COMMUNITY-LIST-
NAME
Default
Command Mode
Usage Guideline
Example
Switch(config)#show ip community-list
Named Community standard list C1
permit internet
Named Community standard list C2
permit 3:2
Switch(config)#
CLI Reference Guide
To display configured community lists, use the show ip community-list
command.
(Optional) Community list name. The community list name can be standard or
expanded.
None
User EXEC or any configuration mode
This command can be used without any arguments or keywords. If no arguments
are specified, this command will display all community lists. However, the
community list name can be specified when entering the show ip community-
list command. This option can be useful for filtering the output of this command
and verifying a single named community list.
This example shows how to display the content of all community lists.
show ip community-list
622