Maximum-Paths - D-Link DGS-6600-48TS Manual

DGS-6604 m

maximum-paths

maximum-paths NUMBER-PATHS
Syntax Description
NUMBER-PATHS
Default
Command Mode
Usage Guideline
Example
Router(config)# maximum-paths 8
CLI Reference Guide
To control the maximum number of parallel routes that an IP routing protocol can
support, use the maximum-paths command in router configuration mode.
Maximum number of parallel routes that an IP routing protocol installs in a
routing table; valid values are from 1 to 8.
NUMBER-PATHS: 6
Global configuration
None
The following example shows how to allow a maximum of 8 paths to a
destination for an Open Shortest Path First (OSPF) routing process::
Verify the settings by entering the show ip route summary command.
maximum-paths
427