Terminal Timeout - D-Link DGS-6600-48TS Manual

DGS-6604 m

terminal timeout

terminal timeout {never| 2_minutes| 5_minutes| 10_minutes| 15_minutes}
Syntax Description
never
2_minutes
5_minutes
10_minutes
15_minutes
Default
Command Mode
Usage Guideline
Examples
Switch# terminal timeout never
CLI Reference Guide
Use this command to setup a timeout value, which upon its expiry, will auto-
logout the terminal session.
Specifies that the terminal session will never timeout.(the default setting).
Specifies that when the session is idle over 2 minutes, the terminal will auto
logout.
Specifies that when the session is idle over 5 minutes, the terminal will auto
logout.
Specifies that when the session is idle over 10 minutes, the terminal will auto
logout.
Specifies that when the session is idle over 15 minutes, the terminal will auto
logout.
never
Privilege EXEC
This timer specifies the length of the session idle time allowed. After this idle
timer expires then the terminal session will be auto-logged out. The timer
operates regardless of whether the session is established by direct serial
connection, telnet connection, or SSH connection.
This example shows how to setup the terminal session to never timeout.
Verify the settings by entering the show running-config command.
terminal timeout
898