D-Link DGS-6600-48TS Manual page 738

DGS-6604 m
DGS-6600:15(config)#show logging host
Host Severity
---------------------------------------------------------
30.65.45.34 informational
35.4.56.2 critical
DGS-6600:15(config)#show logging
logging on :enabled
logging buffer severity:notice
Host Severity
---------------------------------------------------------
30.65.45.34 informational
35.4.56.2 critical
DGS-6600:15#show logging buffer + 3
Total logs:401
Index Date
-----------------------------------------------------------------------------
3 12:12:04, 2010-08-14
2 12:12:04, 2010-08-14
1 12:11:47, 2010-08-14
DGS-6600:15#show logging buffer - 3
Total logs:401
Index Date
-----------------------------------------------------------------------------
401 06:26:45, 1993-01-03
IP 0.0.0.0, via console at privilege level 2
400 06:26:35, 1993-01-03
399 14:05:03, 2010-12-13
nsole
CLI Reference Guide
Facility
local7
local4
Facility
local7
local4
Below is an example of using the + VALUE and - VALUE arguments with the
show logging buffer command:
Log Text
Interface eth4.47 is up
Interface vlan99 is up
System is cold started
Log Text
Successfully login to the system by user anonymous,
System is cold started
System is rebooted by user admin, IP 0.0.0.0, via co
Port
514
1300
Port
514
1300
show logging
728