Erps - D-Link DGS-6600-48TS Manual

DGS-6604 m

erps

erps
no erps
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config)# erps
Switch(config)#
Switch(config)# no erps
Switch(config)#
CLI Reference Guide
Use the erps command to enable ERPS function globally. Use the no form of this
command to disable ERPS function globally.
None
Disabled
Global configuration mode
Enable ERPS function globally will also enable all ERP instances which state are
enabled by using "erpi enable" command. And, disable ERPS function globally
will disable all ERP instances.
The following example shows how to enable ERPS function globally:
The following example shows how to disable ERPS function globally:
erps
190