Show Ip Dvmrp Neighbor - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ip dvmrp neighbor

show ip dvmrp neighbor [INTERFACE-ID | IP-ADDRESS] [detail]
Syntax Description
INTERFACE-ID
IP-ADDRESS
detail
Default
Command Mode
Usage Guideline
Examples
Switch>show ip dvmrp neighbor
Interface
---------------
vlan1
Total Entries: 1
Display Field
Descriptions
Display Field
Interface
Neighbor Address
Generation ID
CLI Reference Guide
Use this command to show DVMRP neighbor information.
(Optional) Specifies the interface ID
(Optional) The IP address of the neighbor
(Optional) Show the neighbor information in detail.
None
User EXEC or any configuration mode
Use this command to display DVMRP neighbor information. If neither
INTERFACE-ID nor IP-ADDRESS is specified, then the information of all
neighbors will be displayed. If the keyword of detail is not specified, then only
brief information for the neighbors will be displayed.
This example shows how to display neighbor information.
Neighbor Address
----------------
10.10.10.11
Description of the significant display fields.
The interface refers to the routing interface which is mapped to a VLAN
interface.
Once a system has received a Probe from a neighbor that contains the
system's address in the neighbor list, then the system has established a
two-way neighbor adjacency with this router.
If a DVMRP router is restarted, it will not be aware of any previous prunes
that it had sent or received. In order for the neighbor to detect that the
router has restarted, a non-decreasing number is placed in the periodic
probe message called the generation ID. When a change in the
generation ID is detected, any prune information received from the router
is no longer valid and should be flushed.
Generation ID ExpTime
------------- -----------
0035ef6d 0DT0H0M29S
Description
show ip dvmrp neighbor
636