Show Storm-Control - D-Link DGS-6600-48TS Manual

DGS-6604 m

show storm-control

show storm-control [interface [INTERFACE-ID] [, | -] [broadcast | multicast | unicast]]
Syntax Description
INTERFACE-ID
broadcast
multicast
unicast
Default
Command Mode
Usage Guideline
Examples
Switch# show storm-control interface broadcast
Interface Storm
----------- -------------- --------- ------------------ --------------
eth3.1 Broadcast
eth3.2 Broadcast
eth3.3 Broadcast
Total Entries:3
CLI Reference Guide
Use this command to show the current storm control settings.
Interface name/id.
Displays the current Broadcast storm setting
Displays the current Multicast storm setting
Displays the current Unicast (DLF) storm setting
None
User EXEC or any configuration mode
If the INTERFACE-ID is specified, the storm control settings of the specified
interface will appear on the screen.
If no INTERFACE-ID is specified, then the configurations of all interfaces will
appear.
If no traffic type is specified, then all types of storm control settings will appear.
If there is no configuration on the interface specified, the interface will not be
displayed,
This example shows the current Broadcast storm control setting.
Action
Drop
Shutdown
Shutdown
Type
pps
percentage
percentage
show storm-control
Threshold
500
80
80
764