Neighbor Peer-Group (Add Group Member) - D-Link DGS-6600-48TS Manual

DGS-6604 m

neighbor peer-group (add group member)

neighbor IP-ADDRESS peer-group PEER-GROUP-NAME
no neighbor IP-ADDRESS peer-group PEER-GROUP-NAME
Syntax Description
IP-ADDRESS
PEER-GROUP-NAME Name of the BGP peer group
Default
Command Mode
Usage Guideline
Example
Switch(config)# router bgp 65100
Switch(config-router)# neighbor ALPHA-GROUP peer-group
Switch(config-router)# neighbor 10.1.1.254 peer-group ALPHA-GROUP
CLI Reference Guide
Use this command to add a neighbor into a peer group. Use the no form of the
command to remove a neighbor from a peer group.
IP address of the neighbor.
None
Router configuration
Address family configuration
The neighbor at the specified IP address inherits all the configured options of the
peer group.
This example shows how to add a group member 10.1.1.254 to the peer group,
named ALPHA-GROUP.
Verify the settings by entering the show ip bgp neighbor command in User
EXEC mode.
neighbor peer-group (add group member)
448