Show Port-Security - D-Link DGS-6600-48TS Manual

DGS-6604 m

show port-security

show port-security [interface INTERFACE-ID [, | -]] [address]
Syntax Description
INTEFACE-ID
,
-
address
Default
Command Mode
Usage Guideline
Examples
DGS-6600:15#show port-security interface eth4.1
Interface Max No.
---------------------------------------------------------------------------
eth4.1
Total Entries: 1
CLI Reference Guide
Use this command to display the current port security setting.
(Optional) Specifies the ID of interfaces to display.
(Optional) Specifies a series of interfaces, or separate a range of interfaces from
a previous range. No space before and after the comma.
(Optional) Specifies a range of interfaces. No space before and after the hyphen.
(Optional) Display all the secure MAC addresses including both of configured
and learned entries.
None
User EXEC or any configuration mode
If no interface ID is specified, the show port-security command will display the
port security setting of all existing port interfaces.
If the mac-address address option is specified, the configured and learned
secure MAC address entries will be displayed.
If no optional keyword is specified with show port-security command, all of the
port-security information is displayed.
This example shows how to display the port security setting of interface port
eth4.1.
Current No.
1 0
Violation Secure Type
Shutdown Delete-on-Timeout
show port-security
State
Disabled
740