D-Link DGS-6600-48TS Manual page 578

DGS-6604 m
Example
switch(config)# sflow receiver 1 owner collector1 expiry 86400 max-datagram-
size 1400 host 10.1.1.2 udp-port 6343
CLI Reference Guide
Use the no sflow receiver command to reset the Receiver.
When a Receiver expired, the Receiver is disabled and the Receiver entry will be
reset to the default settings. The expiration timer starts to count down when its
value is configured.
The user cannot configure the expiry timer as 0.
This example shows how to configure the Receiver of INDEX 1 with owner name
as collector1, TIMEOUT as 86400 seconds, SIZE as 1400 bytes,
sFlow collector's IP-ADDRESS as 10.1.1.2 and PORT as 6343.
sflow receiver
568