Shutdown (Management Port) - D-Link DGS-6600-48TS Manual

DGS-6604 m

shutdown (Management Port)

shutdown
no shutdown
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config)#mgmt-if
Switch(mgmt-if)#shutdown
Switch(mgmt-if)#end
CLI Reference Guide
Use this command to disable the management port. Use the no form of the
command to turn the management port back to the enabled state.
None
Enabled
Management interface
This command will disable the management port. Users cannot access or
manage the system using the management port until the no shutdown command
is executed.
Use the shutdown command to disable the Management Port.Verify the settings
by entering the show mgmt-if command.
shutdown (Management Port)
790