Show Ipv6 Rip Database - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ipv6 rip database

show ipv6 rip database
Syntax Description
database
Default
Command Mode
Usage Guideline
Examples
Switch > enable
Switch # show ipv6 rip database
Codes: R - RIP, Rc - RIP connected, Rs - RIP static,
K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network
R 3ffe:1::/64
0DT0H2M31S
R 3ffe:2::/64
0DT0H2M31S
Rc 3ffe:3::/64
Rc 3ffe:4::/64
Total Entries: 4 entries, 4 routes
CLI Reference Guide
To display information about current IPv6 RIP processes, use the show ipv6 rip
database command.
If specified the command displays the details of the entries in the specified RIP
IPv6 routing table.
None
User EXEC
The information displayed by the show ipv6 rip database command is useful
when debugging RIPng routing operations.
The following is sample output from the show ipv6 rip database command.
The result after executing this command is as follows.
Next Hop
fe80::219:5bff:fef5:2cc1
fe80::219:5bff:fef5:2cc1
::
::
If Met Time
vlan2
vlan2
vlan3
vlan2
show ipv6 rip database
2
2
1
1
719