Ip Dhcp Pool - D-Link DGS-6600-48TS Manual

DGS-6604

ip dhcp pool

ip dhcp pool NAME
no ip dhcp pool NAME
Syntax Description
NAME
Default
Command Mode
Usage Guideline
Example
switch# configure terminal
switch(config)# ip dhcp pool pool1
CLI Reference Guide
Use this command to configure a DHCP address pool on a DHCP Server and
enter the DHCP pool configuration mode. Use the no form of this command to
remove the address pool.
The address pool name can either be a symbolic string or an integer. The
maximum length is up to 64 characters.
Not configured
Global configuration
This command changes the configuration mode to DHCP pool configuration
mode, identified by the (config-dhcp)# prompt. In this mode, the administrator
can configure pool parameters, for example, the IP subnet number and default
router list.
Note that the DHCP pool name can play an important role if the DHCP host
requests meet the IP address offering criteria of more than one DHCP pool. The
pool name with the shortest name and lowest alphabet is the only pool allowed to
offer the correct IP address to the host.
The following example configures the address pool named "pool1".
ip dhcp pool
252