Service Dhcp - D-Link DGS-6600-48TS Manual

DGS-6604 m

service dhcp

service dhcp
no service dhcp
Syntax
Default
Command Mode
Usage Guideline
Example
switch > enable
switch# configure terminal
switch(config)# service dhcp
CLI Reference Guide
Use this command to enable a Dynamic Host Configuration Protocol (DHCP)
server features on the switch. Use the no form of this command to disable DHCP
server features.
None
Disabled
Global configuration
Use this command to enable DHCP server function. The DHCP server function is
disabled by default.
Enable DHCP server function:
service dhcp
543