Dhcp Client Clear Ipv6 Dhcp Client - D-Link DGS-6600-48TS Manual

DGS-6604 m
clear ipv6 dhcp client
clear ipv6 dhcp client INTERFACE-NAME
Syntax Description
INTERFACE-NAME
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # clear ipv6 dhcp client vlan1
Success.
Switch #
CLI Reference Guide
This command is used to restart the DHCPv6 client on an interface.
Specifies the identifier of the switch interface on which to restart the DHCPv6
client.
None
Privileged EXEC
The clear ipv6 dhcp client command restarts DHCP for an IPv6 client on a
specified interface after first releasing and un-configuring the previously acquired
prefixes and other configuration options (for example, Domain Name System
[DNS] servers).
The following example restarts the DHCPv6 client for interface vlan1:
clear ipv6 dhcp client
105