Show Vlan-Tunnel - D-Link DGS-6600-48TS Manual

DGS-6604 m

show vlan-tunnel

show vlan-tunnel [INTERFACE-ID [ , | - ] ]
Syntax Description
[INTERFACE-ID [ , | - ]
]
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use this command to display the VLAN tunnel related settings.
(Optional) Multiple interfaces can be specified to be displayed. The multiple
interface numbers are separated by comma, or hyphen. No spaces before and
after the comma or hyphen. If no INTERFACE-ID is specified, VLAN tunnel
settings on all interfaces are displayed. If no argument is specified only the
status of VLAN tunnel mode will be shown.
None
User EXEC or any configuration mode
Specify that the information displayed is about a specific interface(s) in the VLAN
translation table. If no argument is specified only the status of VLAN tunnel mode
will be shown.
show vlan-tunnel
781