D-Link DGS-6600-48TS Manual page 9

-
User Access Verification
Username: power-user
Password:
Copyright (c) 2010 D-Link Corporation. All rights reserved.
DGS-6604:12#
In the following example, the user enters the enable privilege LEVEL command in user EXEC mode to
enter privileged EXEC mode at Power User level:
DGS-6604:2>enable privilege 12
DGS-6604:12#
Privileged EXEC Mode at Administrator Level
This command mode has a privilege level of 15. Users logged in with this command mode can monitor all
system information and change any system configuration settings mentioned in this Configuration Guide.
There are two methods that a user can use to enter privileged EXEC mode at administrator level. The first
method is to login to the Switch with a user account that has a privilege level of 15. The second method
requires a user to login to the Switch in as a user with an advanced user or power user level and and use
the enable privilege LEVEL command.
In this command mode, the user can return to user EXEC mode at an advanced user level by entering the
disable command.
In the following example, the user is currently logged in as an administrator in privileged EXEC mode and
uses the disable command to return to user EXEC mode at an advanced user level:
DGS-6604:15#disable
DGS-6604:2>
DGS-6604 Chassis-based High-Speed Switch
Command Line Interface
Firmware: 2.00.001
ix