Show Lldp Local Interface - D-Link DGS-6600-48TS Manual

DGS-6604 m

show lldp local interface

show lldp local interface INTERFACE-ID [ , | - ] [brief | detail]
Syntax Description
INTERFACE-ID
,
-
brief
detail
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
To display the each physical interface information, which will be carried in the
LLDP TLVs and sent to neighbor devices, use the show lldp local interface
command.
Displays the current available information advertised for LLDP specific
interfaces. Valid interfaces must be physical.
(optional) Specify a series of interfaces or separate a range of interfaces from a
previous range. No spaces are permitted before or after the comma.
(Optional) Specify a range of interfaces. No spaces are permitted before or after
the hyphen.
(Optional) Display the information in brief mode.
(Optional) Display the information in detailed mode.
If neither brief nor detail is specified, display the information in normal mode.
Not applicable
EXEC mode or any configuration mode
This command displays the each physical interface information currently
available for populating outbound LLDP advertisements. If the advertising TLVs
are classified as global information, e.g. System Name, use the command show
lldp to get them.
The following is sample output from the show lldp local interface command to
display outbound LLDP advertisements for eth4.4 in detailed mode.:
show lldp local interface
818