Ip Address (Management Port) - D-Link DGS-6600-48TS Manual

DGS-6604

ip address (management port)

ip address IP-ADDRESS / PREFIX-LENGTH
no ip address
Syntax Description
IP-ADDRESS
PREFIX-LENGTH
Default
Command Mode
Usage Guideline
Example
Switch#configure terminal
Switch(config)#mgmt-if
Switch(mgmt-if)#ip address 10.1.1.1/8
Switch(mgmt-if)#end
CLI Reference Guide
Use the command to set the IP address of the Management Port. Use the no
form of this command to revert to the default IP address.
IP address to be configured for the Management Port.
Prefix Length.
10.90.90.90/8.
Management interface configuration
This is the IP address used for management access to the system. Use no ip
address command to restore the default IP address 10.90.90.90/8.
This example shows how to set 10.1.1.1 as the IP address of the Management
Port.
Verify the settings by entering the show mgmt-if command.
ip address (management port)
228