Show Access-List - D-Link DGS-6600-48TS Manual

DGS-6604 m

show access-list

show access-list [ ip NAME | mac NAME | ipv6 NAME]
Syntax Description
ip
mac
ipv6
NAME
Default
Command Mode
Usage Guideline
Examples
Switch#show access-list
access-list name
-------------------------------- ----------------
rd-mac-acl
simple-ip-aclip
rd-ip-acl
simple-rd-aclip
ip6-acl
Total Entries : 5
Switch#
Switch# show access-list ip R&D
10 permit tcp any 10.20.0.0 255.255.0.0
20 permit tcp any host 10.100.1.2
30 permit icmp any any
CLI Reference Guide
Use this command to display the access-list configuration.
(Optional) Specifies to display a listing for all ip access-lists.
(Optional) Specifies to display a listing for all mac access-lists.
(Optional) Specifies to display a listing for all ipv6 access-lists.
Specifies to display the content of the access-list identified by this NAME string.
Up to 32 characters are allowed.
None
User EXEC or any configuration mode
The detailed content for an access list is only shown for a specific access-list by
using the NAME argument to identify it.
This example provides a listing for all access lists.
This example shows the content for IP access-list R&D.
access-list type
mac ext-acl
ip acl
ip acl
ip ext-acl
ipv6 ext-acl
show access-list
577