Show Snmp Community - D-Link DGS-3100 SERIES Cli Manual

Restrictions
Example usage:
To delete the SNMP community string 'dlink':

show snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
config snmp engineID
Purpose
Syntax
Description
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch's SNMP agent.
Only administrator or operate-level users can issue this command.
DGS3100# delete snmp community dlink
Success.
DGS3100#
To display SNMP community strings configured on the Switch.
show snmp community {<community_string 20>}
The show snmp community command displays SNMP community
strings that are configured on the Switch.
<community_string 20> − A string of up to 20 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
DGS3100# show snmp community
SNMP Community Table
Community Name
-------------------------------- --------------------------
dlink
private
public
Total Entries: 3
DGS3100#
To configure a name for the SNMP engine on the Switch.
config snmp engineID [default | <snmp_engineID 10-64>]
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
View Name
------------------------
ReadView
CommunityView
CommunityView
Access Right
read write
read write
read only
34