Delete Snmp All_Community; Show Snmp Community - D-Link DGS-1210/ME series Reference Manual

delete snmp all_community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete all SNMP community strings:
DGS-1210-28P/ME:5# delete snmp all_community
Command: delete snmp all_community
Success.
DGS-1210-28P/ME:5#

show snmp community

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DGS-1210-28P/ME:5# show snmp community
Command: show snmp community
SNMP Community Table
(Maximum Entries : 10)
Community Name
------------------------
public
private
Total Entries: 2
DGS-1210-28P/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To remove all SNMP community string from the Switch.
delete snmp all_community
The delete snmp all_community command removes all previously
defined SNMP community string from the Switch.
None.
Only administrator, operate or power user-level users can issue this
command.
To display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command displays SNMP community
strings that are configured on the Switch.
<community_string 32> − A string of up to 20 alphanumeric
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
User Name
------------
ReadOnly
ReadWrite
85