Barco ScreenPRO-II User Manual page 93

fåéìí=`çåÑáÖìê~íáçå=jÉåì
From the Input Menu , press
B
A
C
K
Figure 4-4. Input Configuration Menu (sample)
Each input has an associated file that stores all input parameters and settings. Each time
an input is selected on the Source Selection Bus , its associated file is recalled the instant
before it appears on Preview.
The Input Configuration Menu enables you to save or delete the input's associated file —
which guarantees that the exact parameters you set are those that are used on air.
The following functions are provided:
•
•
•
•
•
ScreenPRO-II Controller • User's Guide
{
CFG
INPUT CONFIGURATION
File Number
File Name
Delete Applies To:
SAVE DELETE
File Number — sets the file number into which data is stored. In the current
version, the file number defaults to the input number and cannot be changed.
File Name — sets the alphanumeric file name. In the current version, the file
name automatically defaults to the input name and cannot be changed.
Delete Applies To — because inputs may be set up differently depending upon
the destination, this parameter enables you to identify the destination from which
you want to delete the associated file.
{ }
Press SAVE to save the selected input in the designated input file.
{ }
Press DELETE to delete the selected input file from the designated destination.
If multiple destinations are selected (for example, when you
Note
are using two single-screen configurations), pressing
copies input parameters to both destinations, eliminating the
need to configure and save each input twice.
}
to display the Input Configuration Menu .
SRC_1
IFILE_001
Dest 1
4. Menu Orientation
Input Menu
1
N
A
V
A
D
J
{
SAVE
}
93