Barco ScreenPRO-II User Manual page 233

6. Operations
7.
8.
jçÇáÑóáåÖ=hÉóë
Use the following steps to modify a Key:
1.
2.
3.
4.
5.
6.
7.
8.
9.
ScreenPRO-II Controller • User's Guide
Many creative options are available with Cut + Fill keys. You can ...
~
Use the " Join " mode to link the cut and fill layers together, such that they
move together as one. Refer to the "
page 237 for details.
~
Program a " Move " with the combined Cut + Fill effect. Refer to the
" Using Move " section on page 238 for details.
~
Program a " Move " with only the key signal — such that the moving key
travels over a static fill, revealing portions of the fill as the move
progresses from point to point.
Transition the new look to Program with a CUT or AUTO TRANS . Refer to the
" Working with Transitions
Ensure that the Key is selected in the Layer Control Section , and active for
modification on Preview.
If the Key Menu is not visible, press KEY in the Layer Functions Section .
Key Type — Use the controls in the Key Menu to select the desired key type —
Luma , Color , or Cut + Fill . In Chapter 4, refer to the "
section on page 156 for menu details.
Note Remember that Cut + Fill keys can only be selected on
Layer B when the Split Mode is enabled.
Clip, Gain, Mode, Opacity
Key's clip, gain, invert mode and opacity on Preview. In Chapter 4, refer to the
" Key Menu Functions " section on page 156 for menu details.
Fill Source — Use the controls in the Key Menu to select a self or matte fill key.
If Matte is selected, press { MATTE } to display the Matte Menu , with which you
can choose the matte fill color. In Chapter 4, refer to the "
on page 159 for menu details.
Size and Position — From the Key Menu , press { SIZE & POS } to display the
Key Adjustment Menu . Use the controls to manipulate the Key on Preview. In
Chapter 4, refer to the " Key Adjustment Menu
Crop — Press Crop (in the Joystick Section ) to display the Crop Adjustment
Menu . Select the type of crop, the aspect ratio, and the image's H and V size. In
Chapter 4, refer to the " Crop Menu
Source Size — Press Source (in the Joystick Section ) to display the Key
Source Adjustment Menu . Adjust the source image's size and position within
the Key. In Chapter 4, refer to the "
section on page 167 for menu details.
Special Effects — From the Key , Key Adjustment , Key Source Adjustment or
Matte Menu , press { EFX } to display the Image Effects Menu . Select the desired
effect, including monochrome, chroma and hue, invert and strobe. In Chapter 4,
refer to the " Image Effects Menu
Using Join Mode
" section on page 241 for details.
— Use the controls in the Key Menu to adjust the
" section on page 160 for details.
" section on page 164 for details.
Source Adjustment Menu Description
" section on page 153 for details.
Working with Layers
" section on
Key Menu Functions "
Matte Menu " section
"
233