Barco ScreenPRO-II User Manual page 129

`çãã=pÉíìé=jÉåìë
Information is provided for three different Comm Setup Menus:
•
•
•
bíÜÉêåÉí=pÉíìé=jÉåì
On the Router Specification Menu , when the Communication Type is set to
ETHERNET , press
B
A
C
K
Figure 4-31. Ethernet Setup Menu (sample)
The Ethernet Setup Menu enables you to set the selected router's IP address and port
number.
•
•
•
•
ScreenPRO-II Controller • User's Guide
Ethernet Setup Menu
RS-232 Setup Menu
Lantronix Setup Menu
{
COMM SETUP
ETHERNET SETUP
IP Address
IP Port Number
IP Address — sets the router's IP address.
IP Port Number — sets the router's IP port number, if applicable.
{ }
Press NEXT IP QUAD to advance to the next 3-digit set of numbers in the
address. Use the ADJ knob in the normal manner to change the digits.
{ }
Press TEST COMM to test communications with the defined router:
~
If the test is successful, a " ROUTER CONNECTED " message will
appear that includes the Router name and version.
~
If the test is unsuccessful, a " ROUTER FAILED " message will appear. In
this condition, re-check all connections and settings, and repeat the test.
}
to display the Ethernet Setup Menu :
192.168.0.241
23
TEST NEXT
COMM IP QUAD
4. Menu Orientation
System Menu
N
A
V
A
D
J
129