Barco ScreenPRO-II User Manual page 54

3. Hardware Installation
Safety Precautions
p~ÑÉíó=mêÉÅ~ìíáçåë=
For all ScreenPRO-II Controller installation procedures, please observe the following
important safety and handling rules to avoid damage to yourself and the equipment:
•
•
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
Before opening the ScreenPRO-II Controller shipping box, inspect it for damage. If you
find any damage, notify the shipping carrier immediately for all claims adjustments. As you
open the box, compare its contents against the packing slip. If you find any shortages,
contact your sales representative.
Once you have removed all the components from their packaging and checked that all the
listed components are present, visually inspect the system to ensure there was no damage
during shipping. If there is damage, notify the shipping carrier immediately for all claims
adjustments.
páíÉ=mêÉé~ê~íáçå=
The environment in which you install your ScreenPRO-II Controller should be clean,
properly lit, free from static, and have adequate power, ventilation, and space for all
components.
`çåíêçääÉê=fåëí~ää~íáçå
The ScreenPRO-II Controller is designed to be used in a "tabletop" configuration, without
rack mounting.
Because the Controller is part of a larger system, which can involve a variety of
components including ScreenPRO-II, BlendPRO-II, MatrixPRO routers, ImagePRO,
PresentationPRO-II and one or more projectors, please refer to the "
section on page 73 for comprehensive installation instructions.
54
To protect users from electric shock, ensure that the chassis connects to earth via
the ground wire provided in the AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily
accessible.
System Installation
ScreenPRO-II Controller • User's Guide
"