Barco ScreenPRO-II User Manual page 163

PIP A
Figure 4-61. Clone Mirror Mode
•
ScreenPRO-II Controller • User's Guide
~
Mirror — both images move together as if a mirror is positioned in the
middle of the widescreen overlap region. For example, if you adjust H
Position , both images move towards (and away from) the center of the
widescreen.
Offset — if " Offset " is selected on the Clone Type line, this field enables you to
set the offset (in pixels). If " Mirror " is selected, the field is hidden.
4. Menu Orientation
Cloned
PIP A
Clone Setup Menu
163