Backup/Restore Menu - Barco ScreenPRO-II User Manual

_~ÅâìéLoÉëíçêÉ=jÉåì
From the Miscellaneous Menu , press
Restore Menu :
H
O
M
E
B
A
C
K
Figure 4-44. Backup/Restore Menu (sample)
The Backup/Restore Menu enables you to back up and restore system configurations,
using the console's Flash Memory Card capability. You can also use this function to
transfer configurations between Controllers as required.
The following functions are provided:
•
•
•
•
•
•
In Chapter 6, refer to the "
instructions.
ScreenPRO-II Controller • User's Guide
BACKUP / RESTORE
Device
Controller Options
SP To Restore
Select option to Backup /
Restore to or from the
Flash card.
CHECK
BACKUP
CARD
Note You can only store one system configuration on a Flash
Memory Card.
Device — Selects the device(s) that you want to backup or restore. Choose
between the Ctrlr , SP or Ctrlr+SP .
Controller Options — Selects which portion of the selected devices you want to
backup or restore. Choose between All , System or Presets .
SP to Restore — Selects the device(s) that you wish to restore. Choose between
All devices, or the ID of a specific ScreenPRO-II (e.g., 1 , 2 , 3 ).
Press { BACKUP } to perform a backup operation to the Flash Memory Card using
the selected device(s) and options.
Press { CHECK CARD } to check the system for the presence of a Flash Memory
Card. If a memory card is present, the system then checks for the presence of a
system configuration on the card.
Press { RESTORE } to restore a system configuration from the Flash Memory Card
to the selected device(s).
Using Backup and Restore
4. Menu Orientation
{ }
BACKUP RESTORE to display the Backup/
Ctrlr+SP
All
All
RESTORE
" section on page 253 for
Miscellaneous Menu
N
A
V
A
D
J
141