Barco ScreenPRO-II User Manual page 188

5. System Setup
System Power Up
açïåäç~ÇáåÖ=`çÇÉ
When an incompatibility exists between software code versions, all buttons will flash on the
Controller console. In this situation, the Status Menu automatically appears with the
message " Please Upgrade ."
Use the following steps to download code from the Controller to the target device(s),
including ScreenPRO-II, PresentationPRO-II and BlendPRO-II:
1.
B
A
C
K
Figure 5-2. Software Version Menu (sample)
2.
During the procedure, several "progress" messages will be shown. When the entire
procedure is complete, the Download Code Results Menu will display a summary of the
download. Please note:
•
•
•
At the conclusion of the procedure, each ScreenPRO-II, PresentationPRO-II and
BlendPRO-II is running the same version of code as the Controller.
188
From the Controller's Home Menu , press SYSTEM > { SW VER } to display the
Software Version Menu . Any incompatibilities will be listed.
SOFTWARE VERSION
Controller
BlendPRO-II
SP 1: 1.10
SP 3: 1.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Software version mismatch!
Download device(s) software
DOWNLOAD
CODE
Press { DOWNLOAD CODE } to begin the download process, which takes several
minutes to complete.
Results may appear on multiple pages.
If required, press { PG DN } and { PG UP } to move between pages.
Press { DETAILS } to view additional information for a specific download.
1.10
N
A
1.10
V
SP 2: 1.00
SP 4: 1.10
A
D
J
FORCE
DOWNLOAD
ScreenPRO-II Controller • User's Guide
Software versions
incompatible with
Controller's version