Barco ScreenPRO-II User Manual page 249

6. Operations
k~ãáåÖ=~=p~îÉÇ=píáää=cê~ãÉ
Use the following steps to name a saved still frame.
1.
2.
3.
4.
5.
6.
7.
ScreenPRO-II Controller • User's Guide
Ensure that the still you wish to name has been saved in permanent memory. If
not, refer to the " Saving Still Frames in Permanent Memory
page 248.
Ensure that the Tally option is physically installed, and that a PS-2 keyboard is
connected to the rear-panel Keyboard connector.
On the Frame Grab Menu , press { NAME } to display the Frame Grab Name
Menu .
On the Saved Location line, select the frame that you wish to name.
Using the keyboard, enter the desired name. As you type, characters will appear
in the menu's New Name field.
Press Enter (on the PS-2 keyboard) to save the name. Once saved, the system
"attaches" the name to the still in permanent memory.
Press { BACK } to return to the Frame Grab Menu .
Working with Still Frames
" section on
249