Barco ScreenPRO-II User Manual page 43

2. Hardware Orientation
Descriptions of each button in the Joystick Section are listed below.
Source — press to assign the Joystick to sizing and positioning the source image within
the PIP or Key boundaries. Please note:
Source
•
•
•
To return to normal PIP adjustment, turn the button off. In Chapter 4, refer to the "
Adjustment Menus
Crop — press to re-assign the Joystick to cropping the boundaries of the PIP or Key.
When enabled, the Top Left and Bottom Right buttons are also enabled, and the Crop
Crop
Adjustment Menu appears. To return to normal PIP adjustment, toggle the button off. In
Chapter 4, refer to the "
Reset — the Reset button is a momentary function. Press to reset the current effect (e.g.,
PIP, Key, crop, etc.) to a nominal default value. Think of this function as being "context
Reset
sensitive" — as it resets only the current effect, without affecting other modifications.
Top Left — when the Crop button is lit, press to crop the PIP or Key's top and left edges:
•
Top
Left
•
In Chapter 4, refer to the "
Bottom Right — when the Crop button is lit, press to crop the PIP or Key's bottom and
right edges:
Bottom
•
Right
•
In Chapter 4, refer to the "
Fine Adjust — the Fine Adjust button is a latching function. In any PIP or Key adjustment
mode, press to increase the precision of the Joystick's adjustment range.
Fine
Adjust
In Chapter 6, refer to the "
additional details on Joystick usage.
ScreenPRO-II Controller • User's Guide
In Source mode, the PIP or Key's placement on screen remains static, while the
image is adjusted within.
If a PIP is selected, the Input Source Adjustment Menu appears when Source
is enabled.
If a Key is selected, the Key Source Adjustment Menu appears when Source is
enabled.
" section on page 165 for additional details.
Crop Menu
Move the Joystick left and right to crop the left edge.
Move the Joystick up and down to crop the top edge.
Crop Menu
Move the Joystick left and right to crop the right edge.
Move the Joystick up and down to crop the bottom edge.
Crop Menu
Modifying Layers On Program
" section on page 164 for additional details.
" section on page 164 for additional details.
" section on page 164 for additional details.
" section on page 234 for
Front Panel Sections
Source
43