Barco ScreenPRO-II User Manual page 160

4. Menu Orientation
Key Menu
hÉó=^ÇàìëíãÉåí=jÉåì
From the Key Menu , press
S
T
A
T
S
K
E
Y
M
A
T
T
E
E
F
X
Figure 4-58. Key Adjustment Menu (sample)
The Key Adjustment Menu is virtually identical to the PIP Adjustment Menu — except
that it pertains to Keys rather than PIPs. The following functions are provided:
•
•
•
•
•
•
160
{
SIZE & POS
KEY ADJUSTMENT
H Size < 33.5% >
V Size < 58.3% >
H Position
V Position
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Move Rate
Key Frame Effect
OPERATION:
JOY Z to SIZE. X Y TO POSITION
TRACK SIZE
H Size — adjusts the Key's horizontal size in pixels. The " % " value indicates the
key's size as a percentage of the screen's horizontal resolution. The numeric
value is the Key's width in pixels. To adjust, use the ADJ knob or the Joystick's Z-
Axis knob.
V Size — adjusts the Key's vertical size in pixels. The " % " value indicates the
Key's size as a percentage of the screen's vertical resolution. The numeric value
is the Key's height in pixels. To adjust, use the ADJ knob or the Joystick's Z-Axis
knob.
H Position — indicates the Key's position, relative to the horizontal center of the
screen ( 00 ), as measured from the exact center of the Key. Thus, the value -160
is 160 pixels to the left of center. To adjust, use the ADJ knob or move the
Joystick left and right.
V Position — indicates the Key's position, relative to the vertical center of the
screen ( 00 ), as measured from the exact center of the Key. Thus, the value 64 is
64 pixels above center. To adjust, use the ADJ knob or move the Joystick up and
down.
Move Rate — adjusts the rate (in 0.1 second increments) for programmed Key
movement, from key frame to key frame. To adjust, use the ADJ knob or twist the
Joystick Z-Axis knob.
Key Frame Effect — indicates the "motion type" that is used to move the Key
from point to point.
Note Only the Linear motion type is supported. All other key frame
effects are ignored by ScreenPRO-II destinations.
}
to display the Key Adjustment Menu .
606
448
-160
64
2.0
[ N/A ]
ScreenPRO-II Controller • User's Guide
N
A
V
A
D
J