Barco ScreenPRO-II User Manual page 181

•
ScreenPRO-II Controller • User's Guide
Type — selects the desired DSK type:
~
When None is selected, the DSK circuitry for a selected ScreenPRO-II
(as chosen with the ID field), can be turned off. This selection is
recommended, for example, when a DSK is only required on one of three
screens (in a wide screen configuration), and when only a single head
graphics card would be required for the "active" DSK source.
~
When DVI is selected, a digital graphic from a computer or other DVI
source can be used as the DSK Source.
Refer to the " Background Menu Functions — DVI Type
page 175 for menu details. Note that the functions on the Background
Input Setup Menu are identical to those on the DSK Input Setup Menu
when DVI is selected.
~
When FG_1 , FG_2 or FG_3 is selected, a captured still image can be
used as the DSK source.
Refer to the " Background Menu Functions — FG Type
page 176 for menu details. Note that the functions on the Background
Input Setup Menu are identical to those on the DSK Input Setup Menu
when FG_1 , FG_2 or FG_3 is selected.
4. Menu Orientation
DSK Menus
" section on
" section on
181