Barco ScreenPRO-II User Manual page 81

3. Hardware Installation
sáÇÉç=mêçÅÉëëáåÖ
The purpose of the edge-blending process is to provide a smooth transition for the eye over
the blending region. To provide a smooth transition, identical image data from two (or
more) different projectors must be superimposed, and the output from each projector must
be edge feathered to provide seamless optical mixing of the two source images.
There are two video processing functions that are required specifically to support wide-
screen edge blended displays: Image Overlap and Edge Feathering .
•
Original Image from
Multi-head Graphics Card
Figure 3-6. Image Overlap and Data Doubling
ScreenPRO-II Controller • User's Guide
Image Overlap
Source images consist of a single HD image that has been split into multiple
channels, or a series of images from a multi-head graphics card. In either case,
the source images must be re-formatted to provide image overlap to support the
edge-blending process. The Image Overlap processing is illustrated below. The
width of the blending region determines the amount of required image overlap and
this must be programmable to support different applications.
1280
_äÉåÇmolJff
1024
Image for
_äÉåÇmo
Projector 1
Overlap
_äÉåÇmolJff
Overview of Edge-Blending Technology
ÇmolJff
Image
Region
1 2
1280
Unused
Source
Material
Image for
Projector 2
81