Barco ScreenPRO-II User Manual page 27

bÑÑÉÅí=`çãÄáå~íáçåë
This section illustrates the many (but not all) combinations of image effects that you can
create using the ScreenPRO-II Controller. Please note:
•
•
Similar to individual ScreenPRO-II units, the ScreenPRO-II Controller enables you to
control two backgrounds, two scalable layers in the mixer plus an unscaled DSK and a full
screen, unscaled LOGO. The LOGO, DSK and backgrounds are always unscaled.
jáñÉê=bÑÑÉÅí=N
This effect includes a non-transitioning background (either A or B), one transitioning PIP
and the DSK.
Background
A ↔ B
Figure 1-7. Effect 1 Diagram
jáñÉê=bÑÑÉÅí=O
This transition is similar to effect 1, but because the DSK is not in use, the background can
transition from source A to B, and the PIP can transition between layers A and B.
Background A
A ↔ B
Figure 1-8. Effect 2 Diagram
ScreenPRO-II Controller • User's Guide
In the following illustrations, the specific layers used in creating each effect are
labeled (e.g., PIP A , PIP B ).
↔
The symbol denotes a PIP or a key that can transition. For example, PIP A
B indicates that you can dissolve between sources within the PIP.
Important If the DSK is in use, the background cannot transition
between A and B. This occurs because BG/DSK Input B is
shared between the DSK and BG B .
PIP
DSK
↔
B
PIP
NK==fåíêçÇìÅíáçå
System Overview
↔
27