Barco ScreenPRO-II User Manual page 57

3. Hardware Installation
•
•
•
•
•
•
Before you complete the actual charts, please review the sample charts as provided in the
following two sections:
•
•
ScreenPRO-II Controller • User's Guide
Digital Router I/O Chart
If you are using external routing, complete the digital I/O router chart for your
digital input and output connections. The chart can also be used to specify router
outputs that connect to Aux destinations.
Analog Input Chart — Direct or DA Connections
If you are using internal routing, complete the analog input chart for direct or DA
analog connections to each ScreenPRO-II and other target analog destinations.
Be sure to check ( ) whether or not the analog input is a direct connection, or
from a DA output.
Digital Input Chart — Direct or DA Connections
If you are using internal routing, complete the digital input chart for direct or DA
digital connections to each ScreenPRO-II and other target analog destinations.
Be sure to check ( ) whether or not the digital input is a direct connection, or from
a DA output.
DVI Connection Chart
For all system configurations, complete the DVI Connection Chart to map your
Background and DSK DVI connections. Be sure to check ( ) whether or not the
DVI source originates from a multi-head graphics card, or a DA (or splitter).
Standard Destination Chart
For all system configurations, complete the Standard Destination Chart . The
ScreenPRO-II Controller enables you to configure up to four standard
destinations. Note that the chart is also used to map the usage of BlendPRO-II in
widescreen configurations.
Auxiliary Destination Chart
For all system configurations, complete the Auxiliary Destination Chart . The
ScreenPRO-II Controller enables you to configure up to four auxiliary
destinations.
" Sample Connection Charts — External Routing
" Sample Connection Charts — Internal Routing
Connection Charts
", page 58.
", page 62.
57