Capturing Still Frames From A Background Input; Capturing Still Frames From A Layer; Saving Still Frames In Permanent Memory - Barco ScreenPRO-II User Manual

6. Operations
Working with Still Frames
5.
6.
7.
8.
Please note:
•
•
p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó
Use the following steps to save a captured still into permanent memory.
1.
2.
3.
4.
248
~
The system will capture the "selected" layer in its current size and
position , with no borders, and with black as the background.
~
If you have two layers on Preview, only the active (selected) layer will be
captured, regardless of image priority.
Press { HOME } > { FRAME GRAB } to display the Frame Grab Menu .
On the Frame Number line, select the temporary frame store into which the still
will be captured ( FG_1 , FG_2 or FG_3 ).
Press { CAPTURE }. Once pressed, the screen will indicate that the frame is being
captured. A pop-up message confirms the procedure.
Repeat the procedure from step 1 to capture additional stills from a layer.
Remember that you can always overwrite FG_1 , FG_2 or FG_3 .
The captured still(s) can now be assigned as the input "type" for BG A , BG B , the
DSK or the LOGO . In Chapter 5, refer to the following sections for instructions:
~
" Background Setup
~
" DSK Setup Procedure
~
" LOGO Setup Procedure
Captured stills reside in temporary memory. If the system is powered down or
reset, the stills will be lost. To save stills in permanent memory, refer to the
"

Saving Still Frames in Permanent Memory

Note Only "saved" still frames can be named.
Capture a still as outlined in the previous two sections.
~
"

Capturing Still Frames from a Background Input

~
"

Capturing Still Frames from a Layer

Warning Do not execute the next step during live production. All
controls will be locked during the "save" process. It is
recommended that you save your stills during pre-production
as a "setup" procedure.
On the Frame Grab Menu , use the Frame Number line to select the frame that
you wish to save.
Press { SAVE } to save the captured frame into the selected storage register
( FG_1 , FG_2 or FG_3 ). Once pressed, the screen displays an important warning:
~
Press YES to save the frame. All front panel controls will be locked for
up to three minutes.
~
Press NO to cancel the procedure.
If required, press { DELETE } to delete the selected frame from permanent storage.
This button only appears when frames are stored in permanent memory.
," page 205.
," page 211.
," page 212.
" section on page 248.
" on page 247.
ScreenPRO-II Controller • User's Guide
" on page 247.