Crop Menu - Barco ScreenPRO-II User Manual

4. Menu Orientation

Crop Menu

`êçé=jÉåì
With a PIP or Key selected, press Crop (in the Joystick Section ) to display the Crop
Menu , as shown in the sample below.
H
O
M
E
S
T
A
T
S
Figure 4-62. Crop Menu (sample)
The Crop Menu enables you crop the sides of a PIP or a Key without affecting the size of
the source image. The menu works with the Top Left and Bottom Right buttons:
•
•
•
The following functions are provided:
•
•
•
•
•
164
CROP ADJUSTMENT
H Size < 53.3% >
V Size < 50.0% >
- - - - Aspect Ratio - - - -
Mode
Ratio
OPERATION:
JOY Z TO CROP SIZE
TRACK SIZE
When Top Left is enabled, the menu adjustments only affect the top and left sides
of the PIP or Key. The legend on the menu's top line reads TOP-LEFT .
When Bottom Right is enabled, menu adjustments only affect the bottom and
right sides of the PIP or Key. The legend on the top line reads BOTTOM-RIGHT .
When the Top Left and Bottom Right buttons are off, menu adjustments affect all
sides of the PIP or Key. The legend on the top line reads ALL-SIDES .
H Size — adjusts the PIP or Key's horizontal size. The " % " indicates size as a
percentage of the screen's horizontal resolution. The value is the width in pixels.
V Size — adjusts the PIP or Key's vertical size. The " % " indicates size as a
percentage of the screen's vertical resolution. The value is the height in pixels.
Mode — in the Aspect Ratio section, this function selects one of several
standard aspect ratios: 16:9 , 5:4 , 4:3 , 3:2 and 1:1 .
Ratio — displays the corresponding ratio based on the selected Mode ( 1.777 ,
1.25 , 1.333 , 1.500 , 1.000 ) and enables you to select custom aspect ratios.
Enable the { TRACK SIZE } check box to proportionally crop H Size and V Size .
Disable the function for individual parameter adjustments.
Note To remove any crop effects from the PIP or Key, press the
RESET button in the Joystick Section — while the Crop
Menu is active. No other parameters will be affected.
ALL-SIDES
682
N
A
512 V
4:3
1.333
A
D
J
ScreenPRO-II Controller • User's Guide