Barco ScreenPRO-II User Manual page 63

3. Hardware Installation
fåíÉêå~ä=oçìíáåÖ=Ô=p~ãéäÉ=^å~äçÖ=fåéìí=`Ü~êí
With a ScreenPRO-II configured to use internal routing (on the Destination Setup Menu ),
use the following chart to map Analog Inputs to each ScreenPRO-II and other target
analog destinations. Note that the use of DAs is recommended to provide identical inputs
to each ScreenPRO-II (or target device).
Table 3-7. Sample Analog Input Chart — Direct or DA Connections
Analog Inputs
Source Name
Camera
DVD
MAC
PC
fåíÉêå~ä=oçìíáåÖ=Ô=p~ãéäÉ=aáÖáí~ä=fåéìí=`Ü~êí
With a ScreenPRO-II configured to use internal routing, use the following chart to map
Digital Inputs to each ScreenPRO-II and other target digital destinations. The use of DAs
is recommended to provide identical inputs to each ScreenPRO-II (or target device).
Table 3-8. Sample Digital Input Chart — Direct or DA Connections
Digital Inputs
Source Name
Server
ScreenPRO-II Controller • User's Guide
Direct DA DA Output
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Direct DA DA Output
1
2
3
4
Connection Charts
Target Input
PresentationPRO-II, Analog Input
ImagePRO, Analog Input
ScreenPRO-II #1, Input 1 Analog
ScreenPRO-II #2, Input 1 Analog
PresentationPRO-II, Analog Input
ImagePRO, Analog Input
ScreenPRO-II #1, Input 2 Analog
ScreenPRO-II #2, Input 2 Analog
ScreenPRO-II #1, Input 3 Analog
ScreenPRO-II #2, Input 3 Analog
ScreenPRO-II #1, Input 4 Analog
ScreenPRO-II #2, Input 4 Analog
ScreenPRO-II Input
ScreenPRO-II #1, Input 1 Digital
ScreenPRO-II #2, Input 1 Digital
63